Oon ("Out Of Neutral"); Drive Oon Warning - Invacare LINX REM400 User Manual

LiNX® Control System
Fault Icon Fault Description
Left magnetic brake fault
Right magnetic brake fault
Module fault (other than remote module)
Configuration of the motors depends on the wheelchair model.

8.2 OON ("Out Of Neutral")

OON ("Out Of Neutral") is a safety feature that prevents accidental driving or seating movements when:
The system is powering up
l
After a function change
l
When the system comes out of an inhibit or drive lockout
l

8.2.1 Drive OON Warning

The joystick must be in the center position:
When a system is powering up
l
On a function change
l
When transitioning from a drive lockout or inhibit state
l
Otherwise, a drive OON warning displays by an overlay. During a drive OON warning, the OON overlay displays and the wheelchair
does not drive. If the joystick is returned to the center position, the warning clears and the wheelchair drives normally.
90
Possible Action
Check cables and connectors.
l
Ensure the left magnetic brake is engaged.
l
Ensure the left motor or motor lock lever is engaged.
l
Refer to the "Pushing the mobility device in freewheel mode"
l
chapter in the wheelchair user manual.
Contact your provider.
l
Check cables and connectors.
l
Ensure the right magnetic brake is engaged.
l
Ensure the right motor or motor lock lever is engaged.
l
Refer to the "Pushing the mobility device in freewheel mode"
l
chapter in the wheelchair user manual.
Contact your provider.
l
Check cables and connectors.
l
Check modules.
l
Recharge the batteries.
l
If the chair was stalled, reverse away or remove any obstacles.
l
Contact your provider.
l
60126081-C