Selecting A Connectivity Card - Invacare LINX REM400 User Manual

LiNX® Control System
4. In the Paired Devices section ,select the paired device (for
example, laptop D) you want to remove.
5. Check the details on the following screen, and tap the
Forget this Device button.
64
6. Tap the Forget this Device button again, or tap the Cancel
button to cancel the removal operation.

Selecting a Connectivity Card

For more information about selecting user function cards, see
6.2.2 Direct Navigation, page 31 or 6.2.3 Indirect Navigation,
page 33.
If a connectivity card in the profile is not configured fully or is
subject to an error, it is classified as inoperable. See the
preceding image.
A connectivity card can be inoperable for several reasons,
including:
the function's primary input is missing
l
the Bluetooth module has hardware errors
l
a device is not linked
l
Bluetooth is not enabled
l
For the latter two reasons, the card can be selected because
the issues are rectified later.
60126081-C