Display; Interaction - Invacare LINX REM400 User Manual

Display

Interaction

60126081-C
Label Entry Function
Brightness Decrease or increase screen brightness.
A
B Language Change the Menu screen user interface to the selected language.
Label Entry Function
Tap-
A Only Toggle between tap mode and swipe-and-tap mode
Mode
Define the area used for detecting a tap action on the touch screen. It
sets the area around the point of initial contact, within which a tap is
recognized. Outside this area, further, continuous contact is considered
a drag/swipe.
Recommendation:
Tap
B
Good dexterity →Low value (small tap zone)
l
Zone
Poor dexterity → High value (large tap zone)
l
Toggle between right-hand and left-hand usage of the remote.
Left
When the switch is set to ON, all user controls (for example, the
C Hand
Navigation button, speed slider, and lighting controls) are displayed and
Mode
operable from the left-hand side of the screen.
This parameter does not change the area around fixed inputs,
such as buttons or links.). It is solely for the area around the
first point of contact when tapping or swiping.
6 Usage
27