Invacare LINX REM400 User Manual page 67

LiNX® Control System
2. On the Status display, open the Settings menu B.
3. From the Settings menu, open the Connectivity menu C.
4. Open a connectivity function, for example D, to configure
the cursor settings.
66
For each mouse mover function, you can set the following
cursor settings:
Fast Cursor Speed
l
Slow Cursor Speed
l
Slow Movement Time
l
X-axis: Time
A
B Y-axis: Speed
C Slow Cursor Speed
D Ramp
Fast Cursor Speed
E
F Slow Movement Time
G 2x Slow Movement Time
Slow Cursor Speed C: Sets the speed at which the mouse
cursor moves when initially deflected. It remains at this speed
for the duration set by the Slow Movement Time F. The Slow
Cursor Speed is set so you can move the mouse cursor slowly
over small distances, which is useful for small adjustments such
as moving between screen icons that are close together. Slow
Cursor Speed should be set equal to or less than Fast Cursor
Speed E.
60126081-C