Switches; Sliders - Invacare LINX REM400 User Manual

LiNX® Control System
Fig. 6-1 Example of a button
1. Tap the button A to perform the action.

Switches

Switches are used to change between two different states, such
as ON and OFF. The current state displays on the screen.
Fig. 6-2 Example of a switch
1. Tap on the switch A to change the state.

Sliders

Sliders are used to continuously change the value of a setting .
Fig. 6-3 Example of a slider
1. Tap and hold the circle A within the slider.
2. Swipe the circle to the right to increase the value. Swipe
the circle to the left to decrease the value.
24 60126081-C