Linking The Connectivity Card With The User's Device - Invacare LINX REM400 User Manual

LiNX® Control System
The LiNX system permits up to 10 devices to be paired
at any time. If you reach this limit and need to add
more devices, consider forgetting paired devices. See
Removing Paired Devices, page 63.

Linking the Connectivity Card with the User's Device

Connectivity cards must be linked to a paired device. To link a
connectivity card to a device, open the Connectivity Settings
menu.
1. Long press the Navigation button A.
2. On the Status display, open the Settings menu B.
3. On the Settings menu, open the Connectivity menu C.
62
The names of the connectivity cards display in the
Functions section.
A
B
C
4. Tap the appropriate menu item to link the connectivity
card with a paired device.
5. If you use a mouse mover function card, note the cursor
speed settings display on top. Scroll down to the Function
Uses Device section.
6. Tap the Not Linked button D.
Function name
Linked device
No linked device
60126081-C