Step Up; Driving; Stopping - Invacare LINX REM400 User Manual

The wheelchair does not drive until the external stop
switch test is completed successfully.

6.6.3 1 Step Up

In this mode, a single drive command (forward or reverse)
causes the wheelchair to accelerate to the maximum drive
speed A of the selected drive screen and remain at that speed
for the programmed Latch Drive Timeout period as long as no
further command is given.

Driving

1. Give a drive command in the desired direction (forward or
reverse).
2. Release the drive command.
The wheelchair speed accelerates to the maximum drive
speed of the selected drive screen.

Stopping

Use one of the following methods to stop:
Give a drive command in the opposite direction (a reverse
l
command when driving forward or a forward command
when driving in reverse).
Press the external stop switch.
l
Perform an emergency stop.
l
Let the Latch Drive Timeout expire.
60126081-C
6.6.4 3 Step Up
In this mode, you can step through one of three fixed speeds.
The speeds available are 33%, 67% and 100% of the maximum
preset reverse or forward speed A of the selected drive screen.
The speed is maintained for the programmed Latch Drive
Timeout period as long as no further command is given.
Driving
1. Give a drive command in the desired direction (forward or
reverse).
2. Release the drive command.
The wheelchair speed accelerates to 33% of the maximum
drive speed.
3. Give a forward command when driving forward or reverse
command when driving in reverse to accelerate to the
next fixed speed.
4. Release the drive command.
The new speed is held constantly.
Stopping
Use one of the following methods to stop:
Give a drive command in the opposite direction (a reverse
l
command when driving forward or a forward command
when driving in reverse).
Press the external stop switch.
l
Perform an emergency stop.
l
Let the Latch Drive Timeout expire.
l
6 Usage
45