Introduction; Dnp3 Outstation Compatible Controllers; Revisions In This Manual - Emerson PACSystems RX3i DNP3 User Manual

PACSystems™ RX3i DNP3 Outstation User Manual
GFK-3103B
Section 1
This document describes DNP3 Outstation protocol over Ethernet on PACSystems RX3i
IC695CPE400/CPL410 and RSTi-EP EPSCPE115 controllers. This feature enables CPE400/CPL410 and
CPE115 controllers to act as a DNP3 Outstation on a DNP3 Network, which permits controller data to
be exchanged with the DNP3 Masters on a given network.
Introductory material may be found in this Chapter. Chapter 2 provides the mechanism to configure
the DNP3 Outstation on this controller. Chapter 3 provides the details of configuration parameters.
Chapter 4 describes HSB Redundancy configuration. Chapter 5 describes system operation. Chapter 6
provide performance data for DNP3 Outstation. Appendix provides a profile of the DNP3 Outstation.
1.1

DNP3 Outstation Compatible Controllers

Catalog Number
IC695CPE400
IC695CPL410
EPSCPE115
1.2

Revisions in this Manual

Rev
B
A

Introduction

Introduction
Date
June 2020
Jan 2020
Description
RX3i 1.2GHz 64MB Rackless CPU w/Field Agent
RX3i 1.2GHz 64MB Rackless CPU w/Linux
RSTi-EP 1.0GHz 1.5MB Rackless CPU
Descriptions
Updates with regard to CPE115 and its use of the DNP3
protocol
Initial Release
Section 1
June 2020
1