Emerson PACSystems RX3i DNP3 User Manual page 99

PACSystems™ RX3i DNP3 Outstation User Manual
GFK-3103B
TALLY A
The 'tally a' command is used for engineering diagnostics. It shows the status of the PLC interface, and
many internal counters, in a numeric fashion. The explanation of this data is not documented here but
is required for support.
> tally a
REM> --------------------------------------------------------------------------------
REM> <<< DNP3 Outstations Tallies >>>
REM> Psh_Ev02=00000000H
REM> Soe_Ev02=00000060H
REM> Soe_Ev42=000001f4H
REM> Events32=00000000H
REM> Cla2_RBE=00000000H
REM> IIN3_Bit=00000000H
REM> IIN7_Bit=00000000H
REM> Ob10RdOK=00025b1aH
REM> Ob34RdOK=00000000H
REM> CROBWrOK=00000000H
REM> AOv2WrOK=00000000H
REM> Ob34WrOK=00000000H
REM>
REM> --------------------------------------------------------------------------------
REM>
Station Manager Status
06-JUN-2019 22:10:14.0 (+0:00)
Psh_Ev11=00000000H Psh_Ev32=00000000H
Soe_Ev11=00000060H Soe_Ev22=00000000H
Events02=00000000H Events11=00000000H
Events42=00000000H Events43=00000000H
Cla3_RBE=00000000H IIN1_Bit=00000000H
IIN4_Bit=00000000H IIN5_Bit=00000000H
IIN8_Bit=00000000H Ob01RdOK=00025b1aH
Ob10RdEr=00000000H Ob30RdOK=00025b1aH
Ob34RdEr=00000000H Ob40RdOK=00025b19H
CROBWrEr=00000000H AOv1WrOK=00000000H
AOv2WrEr=00000000H AOv3WrOK=00000000H
Ob34WrEr=00000000H
Appendix A
June 2020
Psh_Ev42=00000000H
Soe_Ev32=000001f4H
Events22=00000000H
Cla1_RBE=00000000H
IIN2_Bit=00000000H
IIN6_Bit=00000000H
Ob01RdEr=00000000H
Ob30RdEr=00000000H
Ob40RdEr=00000000H
AOv1WrEr=00000000H
AOv3WrEr=00000000H
93