Figure 7: Rsti-Ep Standalone; Figure 8: New Project Instance: Cpe100 - Emerson PACSystems RX3i DNP3 User Manual

Table of Contents

PACSystems™ RX3i DNP3 Outstation User Manual

GFK-3103B

CPE115:

1. Open PAC Machine Edition.

2. From the Navigator pane, right-click the Project node.

3. Navigate to Add a Target -> Controller and select RSTi-EP Standalone (Figure 7).

4. The Navigator pane will update to show a new project with a CPE100/115 controller (Figure 8).

Figure 7: RSTi-EP Standalone

Note:

For CPE115, when the DNP3 Outstation protocol is used in combination of other Ethernet Protocols it is

recommended to set "Watchdog Timer (msec)" Parameter value to 500mSec under Hardware

configuration Settings tab in PME. For more information, please consult the RSTI-EP Controllers

Performance Evaluation Manual, GFK-3086.

Configuration of DNP3 Outstation

Section 2

June 2020

Table of Contents