Di Attributes; Table 12: Di Attributes - Emerson PACSystems RX3i DNP3 User Manual

PACSystems™ RX3i DNP3 Outstation User Manual
GFK-3103B
3.2.3

DI Attributes

This section allows user to configure DI Polled and Events Objects configuration parameters – such as
Binary Input Object 01, 02, and Binary Counter Objects - 20, 21, and 22.

Table 12: DI Attributes

Parameters
DI Attributes
Object01 Parameters
Number of Points
Object01
Memory Address for
Object01
Default Static Variation
Object01
DNP3 Configuration Parameters
Description
If Enabled, the DI
parameters gets
enabled for
configuration.
If Disabled, the DI
parameters are not
allowed to be
configured.
For CPE115,this
parameter is not
applicable for SVC_REQ
configuration
Number of Points.
CPU Reference Memory
Type & Address
Binary Input Object01
default Static
Variation
Valid Values
Value: Enabled/Disabled
Default: Enabled
Value: 1 to 3000
Default: 100
For CPE115:
Value: 1 to 1024
When configured using
SVC_REQ:
Value: 0 to 1024
If set to 0 DI Attributes is
not available.
Memory Type: %I, %Q, %M,
%T, %G
Allocates available reference
Memory ranges
Default: %I00001
For CPE115 When configured
with SVC_REQ:
Memory Type: 70 - %I, 72 -
%Q, 76 - %M, 74 - %T, 86 - %G
If set to 0 DI Attributes is not
available.
Value:
1 - "Binary Input Packed
Format"
2 – "Binary Input with Flag"
Default: 2 – "Binary Input
with Flag"
Section 3
June 2020
36