Table of Contents
Advertisement
PACSystems™ RX3i DNP3 Outstation User Manual
GFK-3103B
Parameters
Force DI
Points to
Point Push
Force DO
Points to
Point Push
Force AI
Points to
Point Push
Force AO
Points to
Point Push
Enable
Point Push
Events
Local
Forced Flag
Enable
Quality
Force
QF
Memory
Address
DNP3 Configuration Parameters
Description
All the points of the DI Object by
default are set in Point Push mode,
disabling automatic detection of data.
Refer Section 5.6.2
All the points of the DO Object by
default is set in Point Push mode,
disabling automatic detection of data.
Refer Section 5.6.2
All the points of the AI Object by default
is set in Point Push mode, disabling
automatic detection of data.
Refer Section 5.6.2
All the points of the AO Object by
default is set in Point Push mode,
disabling automatic detection of data.
Refer Section 5.6.2
Specifies whether the DNP3 Outstation
will force Point Push Events to Set/ Re-
Set the LOCAL FORCED bit in Point
Flags.
Specifies whether the DNP3 Outstation
will Enable / Disable the forcing of the
ONLINE bit to Set/Re-Set in Point Flags.
Refer Section 5.11.
CPU Reference Memory Type & Address
Section 3
June 2020
Valid Values
Value: True/False
Default: False
For CPE115 when
configured using SVC_REQ:
Value: 1 / 0.
Value: True/False
Default: False
For CPE115 when
configured using SVC_REQ:
Value: 1 / 0.
Value: True/False
Default: False
For CPE115 when
configured using SVC_REQ:
Value: 1 / 0.
Value: True/False
Default: False
For CPE115 when
configured using SVC_REQ:
Value: 1 / 0
Value: True/False
Default: False
For CPE115 when
configured using SVC_REQ:
Value: 1 / 0.
Value: True/False
Default: False
This parameter is not
applicable for CPE115 when
configured using SVC_REQ.
Memory Type: %R, %AI,
%AQ, %W
Allocates available
reference Memory ranges
Default: %R00001
For CPE115 when
configured using SVC_REQ:
Memory Type: 8 - %R, 10 -
%AI, 12 - %AQ, 196 - %W
If Memory Type and
Memory Address set to 0
Quality Force is disabled.
29
Advertisement
Table of Contents
