Unsolicited Parameters; Table 8: Unsolicited Parameters - Emerson PACSystems RX3i DNP3 User Manual

PACSystems™ RX3i DNP3 Outstation User Manual
GFK-3103B
3.1.4

Unsolicited Parameters

Table 8: Unsolicited Parameters

Parameters
Enabled
Messages
Maximum
Retries
Retry Delay
(Sec)
Offline Retry
Delay (Sec)
Class 1, 2, and
3 Event Delay
(Sec)
Number of
Class 1, 2, and
3 Events
DNP3 Configuration Parameters
Description
Specifies whether the DNP3 Outstation
unsolicited responses are allowed.
If set to True, Outstation unsolicited
responses are allowed, when Master
request Outstation to enable unsolicited
response.
If set to False, Outstation unsolicited
responses are not allowed, even when
Master request Outstation to enable
unsolicited response.
Specify the maximum number of
unsolicited retries before changing to the
'OFFLINE'.
Specifies the time to delay after an
unsolicited confirm timeout before
retrying the unsolicited response.
Specifies the time to delay after an
unsolicited timeout before retrying the
unsolicited response after Maximum
Retries have been attempted (Set to 0 for
disabling).
Specifies the maximum amount of time in
seconds after an event in the
corresponding class is received before an
unsolicited response will be generated.
Specifies the maximum number of events
in the corresponding class to be allowed
before an unsolicited response will be
generated.
Section 3
June 2020
Valid Values
Value: True/False
Default: True
For CPE115 when
configured using
SVC_REQ:
Value: 1 / 0.
Value: 1 to 255
Default: 3
Value: 5 to 32000 Sec
Default: 5 Sec
Value: 0 to 32000 Sec
Default: 60 Sec
Value: 1 to 32000 Sec
Default value is 5 Sec
Value: 1 to 255
Default value is 5
31