Emerson PACSystems RX3i DNP3 User Manual page 54

PACSystems™ RX3i DNP3 Outstation User Manual
GFK-3103B
Configurations Object42
Object41 Parameters
Command Variation for
Object43 Parameters
DNP3 Configuration Parameters
Parameters
Maximum Events for
Object42
Number of Point
Number of Points for
Object41
Memory Address for
Object41
Object41
Number of Points for
Object43
Description
Maximum Number of
Events for this Event object
Number of Points configured
with other than default Event
Mode & Class Mask that is
set.
For CPE115,this parameter is
not applicable when
configured using SVC_REQ
Maximum Number of Points
Memory Type & Address
Analog Output Object41
Command Variation
Maximum Number of
Points
Section 3
June 2020
Valid Values
Value: 0 to 8000
Default: 500
Value: 0 to Max. Point
configured
Default: 0
Value: 0 to 1000
Default: 0
Value:
Memory Type: %R, %AI, %AQ,
%W
Allocates available reference
Memory ranges
Default: %AQ00201
For CPE115 when configured
using SVC_REQ:
Memory Type: 8 - %R, 10 -
%AI, 12 - %AQ, 196 - %W
Value:
1 – "32-bit"
2 – "16-bit"
3 – "Single-precision, Floating
point"
Default: 1 – "32-bit"
Value: 0 to (Should be <= No.
of Object 41 Points)
Default: 0
48