Changing Network Settings From The Web Page; Informing The End Of Consumable Life And Errors By E-Mail (E-Mail Alert) - Oki c831n User Manual

Changing Network Settings From the Web Page

Changing Network Settings From the Web Page
„ „
This section explains how to change the network settings from the printer's web page.
To access the printer's web page, your computer must meet the following conditions.
● TCP/IP must be enabled.
● Microsoft Internet Explorer 6.0 or later, Safari 3.0 or later, or Firefox 3.0 or later is installed.
Memo
● Ensure that the security setting of the web browser is set to a medium level.
● To enter the [Admin Setup] menu, it is necessary to log in as the administrator. The factory default administrator password is
"aaaaaa".
Reference
● Some of the following settings can be performed on other utilities. For details, refer to
Informing the End of Consumable Life
and Errors by E-mail (E-mail Alert)
5
You can set the printer to send an error
notification e-mail when an error occurs. You can
set when to be notified:
● On a periodical basis
● Only when an error occurs
Configuring Your Printer
You can configure the settings for e-mail alert
using the web page.
Memo
● When you specify a domain name in [SMTP Server],
configure the DNS server in the [TCP/IP] setting.
● You need to set the mail server to allow the printer to
send E-mail. For details on the mail server setting, ask to
your network administrator.
● If you use Internet Explorer 7, be sure to configure
the settings below before you send a test mail. In the
browser, select [Tools] > [Internet Options], then
click [Custom Level] on the [Security] tab. Then
select [Enable] in [Allow websites to prompt for
information using scripted windows].
1
Access the printer's web page and log in
as the administrator.
2
Select [Admin Setup].
3
Select [Network Setup]>[Email]>
[Send Settings].
4
Follow the on-screen instructions to
specify detailed settings.
5
Select [Set detail of the SMTP
Protocol].
6
If necessary, you can configure
[Security settings], [Configure
attached information], and [Others].
7
Click [Submit].
The network card reboots to enable the new
settings.
Periodic Alerts
1
Access the printer's web page and log in
as the administrator.
2
Select [Admin Setup].
3
Select [Network Setup]>[Email]>
[Alert Settings].
4
Enter an e-mail address to receive the
alerts.
5
Click [Setting] for the specified address.
[Copy] is useful when you want to apply the alert
conditions to another address.
6
Follow the on-screen instructions to
specify detailed settings.
7
Click [OK].
8
Click [View a Summary of Current
Configuration] to check the current
settings, and then click [X] to close the
window.
You can also check the current settings of up to
two addresses on the main window. Select the
desired addresses to check from the list box.
9
Click [Submit].
The network card reboots to enable the new
settings.
Memo
● Alert e-mail will not be sent if errors to notify about have
not occurred.
- 130 -
"Network Setting Items" P.102.