Using The Rm-67X Software; The Main Screen; Figure 19. A Shortcut Provides Easy Access To The Rm-67X Software; Figure 20. Main Screen File Menu - JAI RM-670 User Manual

Figure 19.
4.2

Using the RM-67X Software

You must connect a camera via an RS-232 cable to the computer and power it up before starting the camera control
software.
Start the RM-67X software by clicking on the Start menu, and then selecting JAI_RM-67X and clicking the JAI RM-67X
shortcut on the right.
4.2.1

The Main Screen

The main screen offers several menus. Click on File in the menu bar to access the following:
Figure 20.
4.2.1.1
Selecting Preferences opens a separate window that allows the user to set the COM port the camera will use to interface
with the computer. Set the port number by selecting it in the COM Port drop down list box. The system defaults to the COM
port number where the camera is attached.
In addition, this window allows you to rename the Control functions of "Zoom", "Focus", and "Iris". Thus, the controls can be
used for more general purpose functions, such as stepper motors for "Pan" and "Tilt".
Figure 21.
RM-67X Series
A shortcut provides easy access to the RM-67X software.
Main Screen File Menu
Preferences
Set the COM Port
Software Introduction & Installation 27