JAI RM-670 User Manual page 78

8.3.99 WXX – Max ALC Window X Value
Function
Get ALC X Maximum
8.3.100 WYX – Max ALC Window Y Value
Function
Get ALC Y Maximum
8.3.101 Y-Gain
Function
Set Y-Gain
Get Y-Gain
8.3.102 Zoom Control Interval
Function
Set Zoom Control Interval
Get Zoom Control Interval
8.3.103 Zoom Control
Function
Set Zoom Control
Get Zoom Control
78
RM-67X Series
Command String
:WXX?<cr>
Enquire maximum allowable value for ALC window X
coordinate values. Different camera models may have a
different value range.
Command String
:WYX?<cr>
Enquire maximum allowable value for ALC window Y
coordinate values. Different camera models may have a
different value range.
Command String
:YGA=[DDD]<cr>
Set the Y gain value for the TM-773. [DDD] is the gain value
with a range of 0-63.
:YGA?<cr>
Enquire current Y gain value for the TM-773. [DDD] is the gain
value with a range of 0-63.
Command String
:ZCI=[DDD]<cr>
Set the Zoom Control Interval. [DDD] is the interval value with
a range of 1 – 500 msec. This value determines the amount of
time the zoom control motor is pulsed during the ZMI (Zoom
Increment) and ZMD (Zoom Decrement) commands.
:ZCI?<cr>
Enquire current Zoom Control Interval value. [DDD] is the
current value with a range of 1 – 500 msec.
Command String
:ZMC=[DDD]<cr>
Set the Zoom Control. [DDD] is the zoom value with a range of
0 to 127 for a voltage range of 0-9 V. Therefore there are
0.141 V/count.
:ZMC?<cr>
Enquire current Zoom Control value. [DDD] is the current
value with a range of 0 to 127 for a voltage range of 0-9 V.
Appendix
Camera Response
:oWXX[DDD]<cr>
Camera Response
:oWYX[DDD]<cr>
Camera Response
:o<cr>
:oYGA[DDD]<cr>
Camera Response
:o<cr>
:oZCI[DDD]<cr>
Camera Response
:o<cr>
:oZMC[DDD]<cr>