Mcp Gate Disable; Multifunction Input; Multifunction Input Termination - JAI RM-670 User Manual

8.3.61

MCP Gate Disable

Function
MCP Gate Disable/Enable
Get MCP Gate Disable/Enable
State
8.3.62

Multifunction Input

Function
Set Multifunction Input
Get Multifunction Input
8.3.63

Multifunction Input Termination

Function
Set Multifunction Input
Termination
Get Multifunction Input
RM-67X Series
Command String
:MDG=[D]<cr>
Disable or enable the MCP Gate. [D] is the enable parameter.
0 = MCP Gate Disabled.
1 = MCP Gate Enabled.
:MDG?<cr>
Enquire current MCP Gate Enable/Disable state. [D] is the
current state.
0 = MCP Gate Disabled.
1 = MCP Gate Enabled.
Command String
:MFI=[D]<cr>
Set the Multifunction Input mode. [D] is the mode parameter.
0 = VD.
1 = CSYNC.
2 = Trigger.
:MFI?<cr>
Enquire current Multifunction Input mode. [D] is the current
mode value.
0 = VD.
1 = CSYNC.
2 = Trigger
Command String
:MFT=[D]<cr>
Set the Multifunction Input termination. [D] is the termination
parameter.
0 = HiZ.
1 = 75 ohm.
:MFT?<cr>
Enquire current Multifunction Input termination. [D] is the
current termination setting.
0 = HiZ.
1 = 75 ohm.
Appendix
Camera Response
:o<cr>
:oMDG[D]<cr>
Camera Response
:o<cr>
:oMFI[D]<cr>
Camera Response
:o<cr>
:oMFT[D]<cr>
67