Color Intensity - Red; Cid Customer Id String; Color Mode; Defect Correction - JAI RM-670 User Manual

8.3.25

Color Intensity - Red

Function
Get Red Intensity
8.3.26

CID Customer ID String

Function
Set User-defined ID String
Get User-defined ID String
8.3.27

Color Mode

Function
Set Color Mode
Get Color Mode
8.3.28

Defect Correction

Function
Set Defect Correction
Get Defect Correction
RM-67X Series
Command String
:CIR?<cr>
Enquire current red color intensity. [DDDD] is the current
intensity value with a range of 1-4184394.
Command String
:CID=[XXX..]<cr>
Set the user-defined ID string in the camera's EEPOM memory.
[XXX...] specified up to 16 ASCII characters that are the user-
defined ID string.
Note: This feature applies to the TM-770, TM-773, and TM-
775.
:CID?<cr>
Enquire the current user-defined ID string value in the
camera's EEPROM memory. [XXX...] Note: This feature applies
to the TM-770, TM-773, and TM-775.
Command String
:CMD=[D]<cr>
Set camera mode to mono or color. [D] is the mode value.
0 = Mono mode.
1 = Color mode.
:CMD?<cr>
Enquire current color mode. [D] is the current mode value.
0 = Mono mode.
1 = Color mode.
Command String
:DFC=[D]<cr>
Turn Defect Correction on/off. [D] is the state value.
0 = Defect correction off.
1 = Defect correction on .
:DFC?<cr>
Enquire current Defect Correction state. [D] is the current
state value.
0 = Defect correction off.
1 = Defect correction on.
Appendix
Camera Response
:oCGR[DDDD]<cr>
Camera Response
:o<cr>
:o [XXX....]<cr>
Camera Response
:o<cr>
:oCMD[D]<cr>
Camera Response
:o<cr>
:oDFC[D]<cr>
57