Table of Contents
Advertisement
4 Software Introduction
The RM-67X is supported by a software control tool that opens the RS-232 serial port (COM). This section addresses the JAI
RM-67X camera software available for download at www.jai.com.
4.1
Software Installation
Following are instructions to install the RM-67X camera software on a PC.
4.1.1
Before Installing the Camera-Control Software
Before installing the camera control software, please note the following.
•
The RM-67X camera control software is tested for Microsoft Windows 2000 and XP operating systems.
•
We recommend that you use small fonts for the Display Properties dialog box in the control panel.
•
The RM-67X camera control software requires one free communication port that is not in conflict with
other peripherals such as the mouse or modem.
4.1.2
Installing the Software
To install the RM-67X camera control software, follow the steps below.
1.
Download the RM-67X software from the JAI, Inc. web site at www.jai.com.
2.
Locate the software by going to the camera description (RM-670) and clicking on the Software link, or
searching using the site search feature.
3.
Click on the "Save" button to save a compressed copy of the software to the hard drive of your system.
Note: If you go to software and download based on the camera description, for example, RM-600, the software
download is the correct, and latest released version.
Figure 11.
The software is compressed, use decompression software to create the installation directory.
RM-67X Series
RM-67X Camera Control Software
Use Save to download a copy of the software.
Software Introduction & Installation
23
Advertisement
Table of Contents
