Alc Window - Lower Right X; Alc Window - Lower Right Y; Save/Restore Camera State - JAI RM-670 User Manual

8.3.58 ALC Window – Lower Right X
Function
Set ALC Window Lower Right
X value
Get ALC Window Lower Right
X value
8.3.59 ALC Window – Lower Right Y
Function
Set ALC Window Lower Right
Y value
Get ALC Window Lower Right
Y value
8.3.60

Save/Restore Camera State

Function
Save Camera State
Restore Camera State
66
RM-67X Series
Command String
:LRX=[DDD]<cr>
Set the lower right X co-ordinate for the ALC control window.
[DDD] is the size parameter with a range of 3-768. This
command applies to camera models TM-770, TMC-773, and
TMC-775.
:LRX?<cr>
Enquire current lower right X co-ordinate for ALC control
window. [DDD] is the current value with a range of 3-768.
This command applies to camera models TM-770, TMC-773, and
TMC-775.
Command String
:LRY=[DDD]<cr>
Set the lower right Y co-ordinate for the ALC control window.
[DDD] is the size parameter with a range of 3-494. This
command applies to camera models TM-770, TMC-773, and
TMC-775.
:LRY?<cr>
Enquire current lower right Y co-ordinate for ALC control
window. [DDD] is the current value with a range of 3-494.
This command applies to camera models TM-770, TMC-773, and
TMC-775.
Command String
:WSTA=[D]<cr>
Write the camera state to one of two user state files. [D] is
the file selection.
1 = User_1.
2 = User_2.
:LSTA=[D]<cr>
Load camera state. [D] is the state file selection.
0 = Factory defaults.
1 = User_1.
2 = User_2.
Appendix
Camera Response
:o<cr>
:oLRX[DDD]<cr>
Camera Response
:o<cr>
:oLRY[DDD]<cr>
Camera Response
:o<cr>
:o<cr>