Blemish Count; Blemish Threshold; Bright Speed; Camera Model Number - JAI RM-670 User Manual

8.3.13

Blemish Count

Function
Get Blemish Count
8.3.14

Blemish Threshold

Function
Set Blemish Threshold
Get Blemish Threshold
8.3.15

Bright Speed

Function
Set Bright Speed
Get Bright Speed
8.3.16

Camera Model Number

Function
Get Camera Model No
54
RM-67X Series
Command String
:BCT?<cr>
Enquire current blemish count. The camera keeps a list of
blemish pixels that are bright regardless of the input signal.
This function returns the number of blemishes that have been
identified for this camera. [DDD] is the returned count value.
Command String
:BTH=[DDD]<cr>
Set the threshold value that the camera will use as a
comparison value to identify blemish pixels that are bright
regardless of the input signal. Any pixel with a count value
higher than the blemish threshold will be marked as a blemish
pixel. [DDD] is the threshold value and has a range of 0-1023.
:BTH?<cr>
Enquire current blemish threshold value. The camera uses this
threshold as a comparison value to identify blemish pixels that
are bright regardless of the input signal. Any pixel with a
count value higher than the blemish threshold will be marked
as a blemish pixel. [DDD] is the threshold value and has a
range of 0-1023.
Command String
:BTS=[DD]<cr>
Set the BST value (bright speed for ALC). [DD] is the level
value with a range of 1-100. This command applies only to
camera models TM-770.
:BTS?<cr>
Enquire current BTS value (bright speed for ALC). [DD] is the
current value with a range of 1-100. This command applies
only to camera models TM-770.
Command String
:CAM?<cr>
Enquire current Camera Model. [DDD] is a string representing
the model number. Maximum length is 10 characters.
Appendix
Camera Response
:oBCT[DDD]<cr>
Camera Response
:o<cr>
:oBTH[DDD]<cr>
Camera Response
:o<cr>
:oBTS[DD]<cr>
Camera Response
:o[DDD]<cr>