Dark Speed; Electronic Shutter For Alc; Focus Control Interval; Camera Fpga Version - JAI RM-670 User Manual

8.3.29

Dark Speed

Function
Set Dark Speed
Get Dark Speed
8.3.30

Electronic Shutter for ALC

Function
Set Electronic Shutter
Get Electronic Shutter
8.3.31

Focus Control Interval

Function
Set Focus Control Interval
Get Focus Control Interval
8.3.32

Camera FPGA Version

Function
Get Camera FPGA Version
58
RM-67X Series
Command String
:DKS=[DD]<cr>
Set the DKS value (dark speed for ALC). [DD] is the level value
with a range of 1-100. This command applies only to camera
models TM-770.
:DKS?<cr>
Enquire current DKS value (dark speed for ALC). [DD] is the
current value with a range of 1-100. This command applies
only to camera models TM-770.
Command String
:ESH=[D]<cr>
Turn electronic shutter for automatic level control on/off. [D]
is the state value.
0 = Electronic shutter off.
1 = Electronic shutter on
:ESH?<cr>
Enquire current electronic shutter state for automatic level
control. [D] is the current state value.
0 = Electronic shutter off.
1 = Electronic shutter on.
Command String
:FCI=[DDD]<cr>
Set the Focus Control Interval. [DDD] is the interval value with
a range of 1 – 500 msec. This value determines the amount of
time the focus control motor is pulsed during the FOI (Focus
Increment) and FOD (Focus Decrement) commands.
:FCI?<cr>
Enquire current Focus Control Interval value. [DDD] is the
current value with a range of 1 – 500 msec.
Command String
:FPGA?<cr>
Enquire current Camera Firmware Version number. [DDD] is a
string representing the FPGA version number in a n.nn format.
Maximum length is 10 characters.
Appendix
Camera Response
:o<cr>
:oDKS[DD]<cr>
Camera Response
:o<cr>
:oESH[D]<cr>
Camera Response
:o<cr>
:oFCI[DDD]<cr>
Camera Response
:o[DDD]<cr>