Fresh Installation Of The Rm-67X Software; Figure 14. Uninstall Existing Rm-67X Software; Figure 15. Clean Install Of Rm-67X Software - JAI RM-670 User Manual

Figure 14. Uninstall Existing RM-67X Software
4.1.3

Fresh Installation of the RM-67X Software

•
Start by clicking on the Setup icon in the software folder.
•
Click Next to begin a clean install.
Figure 15. Clean Install of RM-67X Software
•
Accept the default installation path by clicking Next, if there is room on the hard drive. Use the browse
button if you wish to set a different installation path.
•
Click the Next button twice to begin the actual software installation.
RM-67X Series
Software Introduction & Installation 25