Table of Contents
Advertisement
8.3.64
MCP Manual Gate
Function
Set MCP Manual Gate
Get MCP Manual Gate
8.3.65
MCP Manual Gain
Function
Set MCP Manual Gain
Get MCP Manual Gain
8.3.66
Mirror Image Mode
Function
Turn Mirror Image On/Off
Get Mirror Image State
8.3.67
MCP Level
Function
Set MCP Level
Get MCP Level
68
RM-67X Series
Command String
:MGA=[DDD]<cr>
Set the MCP manual gate value. [DDD] is the gate code value
with a range of 1-255. This is equivalent to a gate range of
0.065-17 msec. Therefore there are 14.99 count/msec.
:MGA?<cr>
Enquire current MCP manual gate. [DDD] is the current gate
code value with a range of 1-255. This is equivalent to a gate
range of 0.065-17 msec. Therefore there are 14.99
count/msec.
Command String
:MGN=[DDD]<cr>
Set the MCP manual gain value. [DDD] is the gain code value
with a range of 0-255. This is equivalent to a gain voltage of
2.5-5.0 volts.
:MGN?<cr>
Enquire current MCP manual gain. [DDD] is the current gain
value with a range of 0-255. This is equivalent to a gain
voltage of 2.5-5.0 V.
Command String
:MIR=[D]<cr>
Turn the mirror image feature on and off. [D] is the feature
state.
0 = Off (Normal Image).
1 = On. (Image Reversed Horizontally)
:MIR?<cr>
Enquire current mirror image feature state. [D] is the current
mode value.
0 = Off (Normal Image).
1 = On. (Image Reversed Horizontally)
Command String
:MLV=[DDD]<cr>
Set the MCP level. [DDD] is the level value with a range of
200-800.
:MLV?<cr>
Enquire current MCP level. [DDD] is the current bias value with
a range of 200-800.
Appendix
Camera Response
:o<cr>
:oMGA[DDD]<cr>
Camera Response
:o<cr>
:oMGN[DDD]<cr>
Camera Response
:o<cr>
:oMIR[D]<cr>
Camera Response
:o<cr>
:oMLV[DDD]<cr>
Advertisement
Table of Contents
