Table of Contents
Advertisement
2 Installation
The following instructions are provided to help you to set up your video camera system quickly and easily. It is suggested
that you read through these instructions prior to unpacking and setting up your camera system
2.1
Getting Started
2.1.1
Unpacking Instructions
It is recommended that the original packing cartons for the cameras and lenses be saved in case there is a need to return or
exchange an item. It is also recommended that any equipment being sent to another location for field installation be bench
tested to assure that everything is fully operational as a system.
2.1.2
Components List
Please begin by checking your order against the Components List (below) to assure that you have received everything as
ordered, and that nothing has been overlooked in the packing materials. If any item is missing, please contact your JAI, Inc.
representative immediately.
•
RM-670, RM-675 or RM-673 camera
•
RM-67X data sheet (Download from
•
RM-67X Operations Manual (Download from
•
RM-67X Camera Control Software (Download from
2.1.3
Accessories
Following is a list of additional accessories or equipment that may be recommended or required for your particular
application. Please check with your JAI, Inc. representative prior to the installation of your video system to determine what
you might need.
•
Power Cable: 15P-02-9P-FULL or 15P-02-9P
•
Power Supply: PD-12UU
•
Tripod Mounting Kit: TP-50
(for dimensions go to: www.jai.com/EN/CameraSolutions/Products/Accessories/Pages/Home.aspx)
2.2
Camera Setup
2.2.1
Connector Pin Configurations
2.2.1.1
The RM-67X has a 15-pin connector for power input. The pins handle a number of input and output functions, which will be
discussed further in other sections.
Figure 2.
14
RM-67X Series
15-Pin Connector
15-Pin Connector
Hardware Installation
www.jai.com
)
www.jai.com
)
www.jai.com
)
Advertisement
Table of Contents
