Smx - Max Alc Shutter Speed; Sno Factory Unit Id String; Ssx - Max Shutter Speed; Trigger Mode - JAI RM-670 User Manual

8.3.80 SMX – Max ALC Shutter Speed
Function
Set ALC Max Shutter Speed
Get ALC Max Shutter Speed
8.3.81

SNO Factory Unit ID String

Function
Get Factory Unit ID String
8.3.82 SSX – Max Shutter Speed
Function
Get Max Shutter Speed
8.3.83

Trigger Mode

Function
Set Trigger Mode
Get Trigger Mode
RM-67X Series
Command String
:SMX=[DDD]<cr>
Set the max shutter speed value the ALC mode can use. [DDD]
is the shutter speed value with a range of 1-260 (NTSC models)
or 1-310 (PAL models). This controls the maximum shutter
speed that the ALC algorithm will use.
:SMX?<cr>
Enquire current SMX max value. [DDD] is the shutter speed
value with a range of 1-260.
Command String
:SNO?<cr>
Enquire the camera's factory assigned ID string value in the
camera's EEPROM memory. [XXX...]
The returned string is up to 16 ASCII characters made up of a 6
digit ID no, followed by an 8-digit date code, and a 2-digit
revision code. Note: This feature applies to the TM-770, TM-
773, and TM-775.
Command String
:SSX?<cr>
Enquire maximum allowable value for shutter speed. Different
camera models may have a different shutter speed range.
[DDD] is the shutter speed value with a range of 1-260 (NTSC
models) or 1-310 (PAL models).
Command String
:TMD=[D]<cr>
Set the Trigger mode. [D] is the mode parameter.
0 = Off.
1 = Async Reset.
2 = Edge Pre-select.
3 = Pulse Width Mode.
:TMD?<cr>
Enquire current Trigger mode. [D] is the current mode value.
0 = Off.
1 = Async Reset.
2 = Edge Pre-select.
3 = Pulse Width Mode.
Appendix
Camera Response
:o<cr>
:oSMX[DDD]<cr>
Camera Response
:o [XXX....]<cr>
Camera Response
:oSXX[DDD]<cr>
Camera Response
:o<cr>
:oTMD[D]<cr>
73