Aec Mode; Afe Register Address; Afe Write - JAI RM-670 User Manual

8.3.1

AEC Mode

Function
Set AEC Mode
Get AEC Mode
8.3.2

AFE Register Address

Function
Set AFE Register Address
Get AFE Register Address
8.3.3

AFE Write

Function
Write a value to AFE Register
50
RM-67X Series
Command String
:AEC=[D]<cr>
Set the Auto Exposure Control mode. [D] is the mode
parameter.
0 = Manual.
1 = Auto.
User access to control of the AEC feature is determined by the
SB2 setting. If "AEC=: is received, but SB2=0, the command has
no effect but does not return an error code.
Note: Setting AEC to auto will force the AGC mode (AMD) to
manual.
:AEC?<cr>
Enquire current AEC Mode. [D] is the current mode value.
0 = Manual.
1 = Auto.
User access to control of the AEC feature is determined by the
SB2 setting. The "AEC=?" command returns the current value
regardless of the SB2 value.
Command String
:AFA=[DDD]<cr>
Set the AFE register address where subsequent AFE writes
(AFW) will place the value written. [DDD] is the address value
with a range of 0-255.
:AFA?<cr>
Enquire the current AFE register dddress. [DDD] is the address
value with a range of 0-255.
Command String
:AFW=[DDDD]<cr>
Writes a value to an AFE register at the address previously
specified by the AFA command. [DDD] is the address value with
a range of 0-16,777,215.
Appendix
Camera Response
:o<cr>
:oAEC[D]<cr>
Camera Response
:o<cr>
:oAFA[DDD]<cr>
Camera Response
:o<cr>