Table of Contents
Advertisement
8.3.54
Color Coefficient – Blue 2
Function
Set Color Coefficient B2
Get Color Coefficient B2
8.3.55
Color Coefficient – Blue 3
Function
Set Color Coefficient B3
Get Color Coefficient B3
8.3.56
Log Average Weighting
Function
Set Log Average Wt
Get Log Average Wt
8.3.57
Locate Blemishes
Function
Locate Blemishes
RM-67X Series
Command String
:KB2=[DDDD]<cr>
Set the color correction coefficient for Blue 2 (B2). This is the
blue component of the 2
matrix. [DDDD] is the coefficient value with a range of 256 -
4085 counts. The user range for the coefficient value is 0.25 –
3.99. Therefore there are 1024 counts per coefficient unit.
:KB2?<cr>
Enquire current color correction coefficient for Blue 2 (B2).
This is the blue component of the 2
correction matrix. [DDDD] is the coefficient value with a range
of 256 - 4085 counts. The user range for the coefficient value
is 0.25 – 3.99. Therefore there are 1024 counts per
coefficient unit.
Command String
:KB3=[DDDD]<cr>
Set the color correction coefficient for Blue 3 (B3). This is the
blue component of the 3
matrix. [DDDD] is the coefficient value with a range of 256 -
4085 counts. The user range for the coefficient value is 0.25 –
3.99. Therefore there are 1024 counts per coefficient unit.
:KB3?<cr>
Enquire current color correction coefficient for Blue 3 (B3).
This is the blue component of the 3
correction matrix. [DDDD] is the coefficient value with a range
of 256 - 4085 counts. The user range for the coefficient value
is 0.25 – 3.99. Therefore there are 1024 counts per
coefficient unit.
Command String
:LAW=[DD]<cr>
Set the LAW value (log average weighting for ALC). [DD] is the
level value with a range of 1-100. This command applies only
to camera models TM-770.
:LAW?<cr>
Enquire current LAW value (log average weighting for ALC).
[DD] is the current value with a range of 1-100. This command
applies only to camera models TM-770.
Command String
:LDF!<cr>
This command causes the camera to run an internal process to
locate any pixels that can cause blemishes in the image. The
number of blemishes identified can be queried with the BCT
command.
Appendix
Camera Response
:o<cr>
nd
row of a 9 element color correction
:oKB2[DDDD]<cr>
nd
row of a 9 element color
Camera Response
:o<cr>
rd
row of a 9 element color correction
:oKB3[DDDD]<cr>
rd
row of a 9 element color
Camera Response
:o<cr>
:oLAW[DD]<cr>
Camera Response
:o<cr>
65
Advertisement
Table of Contents
