Vacuu·bus Peripheral Devices (Option) - vacuubrand VACUU-SELECT Instructions For Use Manual

VACUU·BUS
principle
20901171_EN_VACUU·SELECT-Komp_V1.4_291021
3.3 VACUU·BUS peripheral devices (option) 3.3 VACUU·BUS peripheral devices (option)
External valves, level sensors and vacuum sensors (up to the
fine vacuum range) are components that can be connected via
VACUU·BUS directly to the controller.
VACUU·BUS components can be easily added or removed at any
time via component detection. Component activation permits the
activation or deactivation of connected components.
VACUU BUS components1 (clients)
When the controller is switched on, it checks the current configu‑
ration. VACUU·BUS components are automatically detected and
are used and monitored until the controller is switched off. If a
previously connected component is no longer found, the control‑
ler displays an error message.
In the case of the VACUU SELECT
VACUU BUS VACUU BUS
deactivated without disconnecting the plug. The venting
valve of a VACUU SELECT
deactivated at the controller.
 See also chapter: 7.1.10 Administration – VACUU·BUS
VACUU SELECT Complete
components can be individually activated or
VACUU SELECT Sensor Sensor
7.1.10 Administration – VACUU·BUS
Product description
Complete, all
can also be easily
27