Built-In Version - vacuubrand VACUU-SELECT Instructions For Use Manual

Installation and connection
Use as built‑in
device
Cut‑out dimensions
(in control cabinet,
lab furniture, cable
duct)
34
4.2.3 Built‑in version 4.2.3 Built‑in version
In the built‑in version, spring clips are fitted on the back of the
controller. This means the controller can be clipped directly into
the installation cut‑out of lab furniture or a control cabinet. The
display can be pivoted so that the controller can be clipped into
place either horizontally or vertically.
Installation cut‑out
a
Wall thickness
1 mm 0.04 in.
2 mm 0.08 in.
3 mm 0.12 in.
Depending on the thickness of the wall, appropriate tolerances
should be allowed for the installation cut‑out.
Spring clips + screw fittings D3 x 10
a
Dimensions (a) for installation cut‑out
111.5 mm x 111.5 mm
112 mm x 112 mm
112.5 mm x 112.5 mm
20901171_EN_VACUU·SELECT-Komp_V1.4_291021
4.39 in. x 4.39 in.
4.41 in. x 4.41 in.
4.43 in. x 4.43 in.
20636593