vacuubrand VACUU-SELECT Instructions For Use Manual page 32

Installation and connection
Mount the wall
bracket
32
Mount the wall bracket
Preparation:
> Have the tool and fittings
ready; e.g., impact drill ,
masonry drill Ø6 mm, wall
plugs size 6, universal
screws, min. 5x30, screw‑
driver.
2
2. Drill 2 holes in the wall and
remove the debris.
4
4. Mount the controller with the
stand holder.
1
1. Use the drilling template to
mark the dimensions on the
surface where the wall brack‑
et should be mounted.
3
3. Insert the rawl plugs and then
secure the wall bracket using
the screws.
5
5. Secure the controller with the
wing nut.
20901171_EN_VACUU·SELECT-Komp_V1.4_291021