Remote Control And Interfaces; Rs-232 Serial Interface; 3.5.2 Modbus Tcp - vacuubrand VACUU-SELECT Instructions For Use Manual

 Example
RS‑232 connection
Required accesso‑
ries
 Example
Ethernet connection
20901171_EN_VACUU·SELECT-Komp_V1.4_291021
3.5

3.5 Remote control and interfaces

Remote control and interfaces
As of Softwareversion V1.04/V1.00 of the VACUU·SELECT
munication will be supported via RS‑232 as well as Modbus TCP.
This enables you to remotely monitor and control the controller
from a central location, for example with a PC or process control
system. For connections  see chapter: 3.2.1 VACUU·SELECT
Complete (schematic design) Complete (schematic design)
3.5.1 RS‑232 serial interface 3.5.1 RS‑232 serial interface
An RS‑232 USB adapter can be connected to one of the USB
ports of the controller, to act as a serial interface.
Adapter cable, USB to RS‑232, 1 m
RS‑232C null modem cable, 2x socket Sub‑D 9‑pin, 1.5 m
3.5.2

3.5.2 Modbus TCP

Modbus TCP
For remote control via Modbus TCP, use the Ethernet connection
RJ45 on the back of the controller.
Detailed descriptions of the interfaces can be found here:
instructions for use.
Product description
VACUU·SELECT , com‑
3.2.1 VACUU·SELECT
20637838
20637837
Interface
29