1.3.5 Term Definitions - vacuubrand VACUU-SELECT Instructions For Use Manual

Introduction
Product‑specific
terms
12

1.3.5 Term definitions

1.3.5 Term definitions
Fine vacuum
Rough vacuum
VACUU·BUS
VACUU·BUS
address
VACUU·BUS
client
VACUU·BUS
configuration
VACUU·BUS
connector
VACUU·SELECT
VACUU·SELECT
Complete
VACUU·SELECT
Sensor *
* Available with or without venting valve
Pressure measuring range in vacuum sys‑
tems, from: 1 mbar‑0.001 mbar (0.75 Torr–
0.00075 Torr)
Pressure measuring range in vacuum systems,
from: atmospheric pressure–1 mbar
(atmospheric pressure–0.75 Torr)
Bus system from VACUUBRAND for com‑
munication between peripheral devices with
VACUU·BUS‑enabled gauges and controllers.
The maximum admissible cable length is 30 m.
Address which enables the VACUU·BUS client
to be unambiguously assigned within the bus
system, e.g., for connecting multiple sensors
with the same measurement range.
Peripheral device or component with
VACUU·BUS port, which is integrated in the
bus system, e.g., sensors, valves, level indica‑
tors, etc.
Assigning a different VACUU·BUS address to
a VACUU·BUS component using a gauge or
controller.
4‑pin round connector for the bus system from
VACUUBRAND.
Vacuum controller, controller with touchscreen;
consisting of operating panel and vacuum sen‑
sor.
Vacuum controller in two‑point version for exist‑
ing vacuum sources such as individual pumps
or powerful local area vacuum networks
External vacuum sensor
` for VACUU·SELECT
or
` separately as an independent vacuum sen‑
sor.
20901171_EN_VACUU·SELECT-Komp_V1.4_291021