vacuubrand VACUU-SELECT Instructions For Use Manual page 69

 Example
Overview
Context menu
settings
Overview of
possible basic
settings
20901171_EN_VACUU·SELECT-Komp_V1.4_291021
Description of basic settings
Function
Autostart
Vacuum sensor
Use venting valve
when target value
changes
Coolant valve(s)
run‑on time*
Level sensor(s) de‑
lay time*
*Option: Shown if component is connected and recognized.
The Basic Settings context menu adapts to the connected
VACUU·BUS VACUU·BUS components, e.g., a level sensor is connected and
activated via component recognition > entry for delay time is list‑
ed in the context menu.
In the Basic Settings you can
specify default settings for your
process:
Setting Description
Off / On Off: The controller remains on
Stop when the power supply is
switched on.
On: A started application is con‑
tinued after the power supply has
dropped off (switch off or failure)
and is subsequently switched on
again. Recommended, for exam‑
ple, when an external switch in the
lab furniture is to be used to start
up a previously running controller.
VS‑C _ / Vacuum sensor selection for the
VS‑P _ controller, provided more than one
is connected. VS‑C _: rough vacu‑
um; VS‑P _: fine vacuum
Off / On Off: Venting valve does not re‑
spond when target value changes.
On: Venting valve responds if re‑
quired for target value adjustment.
Off / hh:mm:ss Specified time for coolant run‑on
time.
Off / hh:mm:ss Delay time for switching off after
full status indicator.
Main menu
69