Vacuu·bus® Peripheral Devices - vacuubrand VACUU-SELECT Instructions For Use Manual

Product description
 Example
VACUU·BUS
principle
with different
components
26
3.3 VACUU·BUS® peripheral devices
External valves, level sensors and vacuum sensors (up to the fine
vacuum range) are components which can be connected via the
VACUU·BUS directly to the controller.
®
VACUU·BUS components can be easily added or removed at
®
any time via component detection. Component activation permits
the activation or deactivation of connected components.
VACUU·BUS components
When the controller is switched on, it checks the current con‑
figuration.
VACUU·BUS
and are used and monitored until the controller is switched off. If a
previously connected component is no longer found, the control‑
ler displays an error message.
In the case of the
components can be individually activated or deactivated
without disconnecting the plug. The venting valve of a
VACUU-SELECT
the controller.
 See also chapter:
1  See also table in chapter: 9.2 Ordering information on page 83
(clients)
1
components are automatically detected
®
VACUU-SELECT
can also be easily deactivated at
Sensor
®
7.1.10 Administration – VACUU·BUS
20901059_EN_VACUU·SELECT_V1.3_280119
, all VACUU-BUS
® ®