vacuubrand VACUU-SELECT Instructions For Use Manual page 84

Troubleshooting
Change device fuse
84
2
2. Carefully lift the display.
4
4. Lever the fuse out of the base. 5. Insert the new fuse in the base.
6
6. Close the housing tightly.
Nano fuse 4 A/t
3
3. Carefully pivot back the display.
5
7
7. Tighten the housing screws
using the Torx screwdriver
(torque 1.1 Nm) and secure
the attachments when work is
complete.
20901171_EN_VACUU·SELECT-Komp_V1.4_291021
20612952