vacuubrand VACUU-SELECT Instructions For Use Manual page 21

20901171_EN_VACUU·SELECT-Komp_V1.4_291021
As a component of the VACUU·BUS
numerous connection options for a wide variety of applications.
Vacuum processes are controlled via in‑line solenoid valves and/
or venting valves. If several valves of one type are connected,
they switch simultaneously, e.g., multiple venting valves.
To control a vacuum, a minimum combination of the
controller, a vacuum sensor, valves and/or vacuum pumps
is needed.
If only the built‑in sensor is present, vacuum control is
not possible.
Product description
VACUU·BUS system, the controller offers
21