vacuubrand VACUU-SELECT Instructions For Use Manual page 71

IMPORTANT!
20901171_EN_VACUU·SELECT-Komp_V1.4_291021
Restoring the factory settings deletes all data, settings and ap‑
plications. The data logger is switched off and recording of diag‑
nostic data is set back to Minimal.
> Back up your settings, applications and data beforehand;
see chapters: 7.1.9 Administration – import/export 7.1.9 Administration – import/export
7.2 Data logger 7.2 Data logger
Default settings for integrating the
controller into your Network.
Activate/deactivate remote control
via Modbus.
Default settings for Serial port and
alignment of the communication
settings (COM) for RS‑232.
Activate/deactivate remote control
via RS‑232.
Activate command for loading
software update from connected
USB flash drive.
Reset the controller to the factory
settings.
Main menu
and
71