General View Basic Setup Vacuu•Lan - vacuubrand CVC 2 Instructions For Use Manual

General view basic setup VACUU•LAN
connect cooling
water valve
☞ ☞ ☞ ☞ ☞ The pump (and the cooling water valve if applicable) is
switched off if the pressure is below the lower pressure
value longer than the time for automatic shut down.
☞ ☞ ☞ ☞ ☞ The pump starts automatically if the pressure is higher
than the upper set point.
Documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check
carefully the validity of this document with respect to his product. manual-no.: 99 90 20 / 01/12/2004
page 22 of 36
setting the basic setup
basic setup VACUU•LAN
yes switching cooling
water valve?
no
setting process parameters
➨ pressure value (condition for automatic shut down)
➨ upper set point (condition for restart)
➨ time for automatic shut down
start: pump down