Table of Contents
Advertisement
Remove the shipping brackets and shipping plates.
4.
Remove the SFF hot-plug drive cage.
5.
Remove the GPU cage.
6.
Remove the PCI/FlexibleLOM riser cage.
7.
Locate the battery on the system board
8.
Remove the battery.
9.
IMPORTANT: Replacing the system board battery resets the system ROM to its default
configuration. After replacing the battery, reconfigure the system through RBSU.
To replace the component, reverse the removal procedure.
For more information about battery replacement or proper disposal, contact an authorized reseller or an
authorized service provider.
("System board
components" on page 9).
System battery 86
Advertisement
Table of Contents
