Front Panel Leds And Buttons - HPE ProLiant SL270s Gen8 User Manual

Front panel LEDs and buttons

Item Description
iLO 4 speed LED
1
iLO 4 status LED
2
NIC 2 status LED
3
NIC 2 speed LED
4
NIC 1/iLO 4 status LED
5
NIC 1/iLO 4 speed LED
6
Power On/Standby button and
7
system power LED
Health LED
8
UID button/LED
9
* To identify components in a degraded or critical state, see the iLO/BIOS logs and the server troubleshooting guide.
** Facility power is not present, power cord is not attached, no power supplies are installed, power supply failure has
occurred, or the power button cable is disconnected.
Status
Green = LAN connection using a GbE link
Amber = LAN connection using a 10 Mbps/100 Mbps link
Off = No link exists
Solid green = Link to network
Flashing green (1 Hz/cycle per sec) = Network active
Off = No network activity
Solid green = Link to network
Flashing green (1 Hz/cycle per sec) = Network active
Off = No network activity
Green = LAN connection using a GbE link
Amber = LAN connection using a 10 Mbps/100 Mbps link
Off = No link exists
Solid green = Link to network
Flashing green (1 Hz/cycle per sec) = Network active
Off = No network activity
Green = LAN connection using a GbE link
Amber = LAN connection using a 10 Mbps/100 Mbps link
Off = No link exists
Solid green = System on
Flashing green (1 Hz/cycle per sec) = Performing power on
sequence
Solid amber = System in standby
Off = No power present**
Solid green = Normal
Flashing amber = System degraded
Flashing red (1 Hz/cycle per sec) = System critical
Fast-flashing red (4 Hz/cycles per sec) = Power fault*
Solid blue = Activated
Flashing blue (1 Hz/cycle per sec) = Remote management or
firmware upgrade in progress
Off = Deactivated
Component identification 7