Table of Contents
Advertisement
Troubleshooting
Troubleshooting resources
The ProLiant Gen8 Troubleshooting Guide, Volume I: Troubleshooting provides procedures for resolving
common problems and comprehensive courses of action for fault isolation and identification, issue
resolution, and software maintenance on ProLiant servers and server blades. To view the guide, select a
language:
•
English (http://www.hpe.com/support/Gen9_TSG_en)
•
French (http://www.hpe.com/support/Gen9_TSG_fr)
•
Spanish (http://www.hpe.com/support/Gen9_TSG_es)
•
German (http://www.hpe.com/support/Gen9_TSG_de)
•
Japanese (http://www.hpe.com/support/Gen9_TSG_ja)
•
Simplified Chinese (http://www.hpe.com/support/Gen9_TSG_zh_cn)
The ProLiant Gen8 Troubleshooting Guide, Volume II: Error Messages provides a list of error messages
and information to assist with interpreting and resolving error messages on ProLiant servers and server
blades. To view the guide, select a language:
•
English (http://www.hpe.com/support/Gen9_EMG_en)
•
French (http://www.hpe.com/support/Gen9_EMG_fr)
•
Spanish (http://www.hpe.com/support/Gen9_EMG_es)
•
German (http://www.hpe.com/support/Gen9_EMG_de)
•
Japanese (http://www.hpe.com/support/Gen9_EMG_ja)
•
Simplified Chinese (http://www.hpe.com/support/Gen9_EMG_zh_cn)
System battery
If the server no longer automatically displays the correct date and time, you might have to replace the
battery that provides power to the real-time clock. Under normal use, battery life is 5 to 10 years.
WARNING: The computer contains an internal lithium manganese dioxide, a vanadium
pentoxide, or an alkaline battery pack. A risk of fire and burns exists if the battery pack is not
properly handled. To reduce the risk of personal injury:
• Do not attempt to recharge the battery.
• Do not expose the battery to temperatures higher than 60°C (140°F).
• Do not disassemble, crush, puncture, short external contacts, or dispose of in fire or water.
• Replace only with the spare designated for this product.
To remove the component:
Power down the server (on page 14).
1.
Disconnect all peripheral cables from the server.
2.
Remove the server from the chassis (on page 14).
3.
Troubleshooting 85
Advertisement
Table of Contents
