Abbott GEMSTAR Operating Manual page 24

Connecting the Rechargeable
Battery Pack
To connect the battery pack:
1
Align the connectors on the top
of the battery pack (A) with the
connectors on the bottom of the
pump (B).
2
Snap the battery pack into place.
To release the battery pack:
1
Press the release button (C) on
the battery pack.
2
Remove the battery pack from
the pump.
Connecting the Abbott GemStar AC
Mains Adaptor
1
Connect the cord of the AC mains
adaptor to the connector labeled
"3VDC" on the bottom of the
pump.
2
Plug the AC mains adaptor into a
standard wall outlet.
CAUTION: ALWAYS connect to a
grounded AC mains
power source when
using the AC mains
adaptor. USE ONLY AC
mains adaptors
specifically labeled for
use with the Abbott
GemStar Pump.
Abbott GemStar Manual 430-600095-002 (Rev. 8/02)
System Setup
B
A
C
B
A
17