Abbott GEMSTAR Operating Manual page 20

To avoid mechanical or electronic damage, NEVER submerge pump in water or other
6
fluids and avoid fluid spills. If pump becomes wet, dry it immediately with a dry,
lint-free cloth. Check connections and programmed data.
Some cleaning and sanitizing compounds may slowly degrade components made from
6
some plastic materials. DO NOT use compounds containing combinations of isopropyl
alcohol and dimethyl benzyl ammonium chloride.
DO NOT sterilize by heat, steam, ethylene oxide (ETO), or radiation. Apply
6
disinfectants to the outside surface of the pump only. DO NOT use abrasive cleaners or
materials on the pump. Using abrasive cleaners or cleaning solutions not
recommended by Abbott Laboratories may result in product damage.
USE ONLY the AC mains adaptor specifically labeled for use with the Abbott GemStar
6
Pump to charge the battery pack.
The Abbott GemStar AC Mains Adaptor is for use with the Abbott GemStar Pump or
6
Abbott GemStar Battery Pack only. DO NOT use the Abbott GemStar AC mains adaptor
with other products.
During charging, the battery pack is warm. If the battery pack becomes hot to the
6
touch, IMMEDIATELY unplug the AC mains adaptor and contact Abbott Customer
Support.
Please comply with local disposal and recycling regulations as appropriate for
6
disposable batteries, rechargeable battery packs, medical electronic components, and
pump sets.
Abbott GemStar Manual 430-600095-002 (Rev. 8/02)
Introduction
13