Table of Contents
Advertisement
4
Secure the bag with flaps (G) and (H).
5
Secure the bag spike with strap (I). Ensure that the fluid flow is not restricted.
6
Use a "figure-8" pattern to wrap the tubing. Secure the tubing to the inside of the
case with tabs (J) and (K). Ensure the tubing is not kinked.
7
Zip the case closed. Ensure the tubing exits through one of the sides near the zipper
tab when the case is closed.
8
Place the case around the waist with the front "window" facing away from the body.
Snap the buckle together to secure. Adjust the belt for a snug, comfortable fit.
Carrying Case - 3 Liter
This soft-sided carrying case may be worn around the waist or as a backpack. It is
designed to hold the Abbott GemStar Pump with batteries or a battery pack, and up to a
3 liter flexible fluid bag.
d
Note: This carrying case includes an interior support (Abbott 3 Liter Carrier List 13590-01) that
may be removed from the case and used separately.
1
Unzip the carrying case and release all Velcro straps and flaps.
2
Place the fluid bag on the carrying case as shown (A).
3
Hook top strap (B) through the hole in the top of the fluid bag and secure.
4
Fold small flaps (C) and (D) over the bag as shown and secure.
5
Secure straps (E) and (F) across the length of the fluid bag and over the small flaps.
6
Secure the spike connection with strap (G).
7
Fold large flaps (H) and (I) over as shown and secure.
8
Place the pump, with the keypad facing upward, inside the pocket (J) on the flap. The
pump's display should be visible through the opening on the front of the pocket.
Abbott GemStar Manual 430-600095-002 (Rev. 8/02)
I
G
H
(List 13593-01)
Optional System Components
J
K
117
Advertisement
Table of Contents
