Abbott GEMSTAR Operating Manual page 131

Abbott GemStar Pump Specifications
External Power LED
Alarm LED
Audible Alarm
Display
Backlight on AC:
Backlight on Batteries:
Real Time Clock
Print Function
Port & Interface:
Printers:
System Accuracy
Air Sensitivity
ON:
2 mL:
OFF:
Occlusion Sensitivity
Distal Occlusion:
Low
Medium
High
Proximal Occlusion:
124
Green LED marked with plug icon illuminates continuously when pump is
connected to AC mains
Green LED flashes when pump is connected to external batteries
Red LED marked with alarm icon illuminates during alarm conditions
The audible alarm is user-adjustable from the maximum volume down to
silent
The alarm automatically reverts to the maximum volume if the user does
not respond within one minute
Backlit, four-line-by-sixteen-character alphanumeric graphics display
Continuous
Continuous during programming, program review, and history display;
otherwise activated by keypress or alarm; not activated by bolus request
Accuracy of ±1 minute per month or better
RS-232 serial interface port, minimum baud rate of 2400, isolated circuit
Seiko DPU 414 or compatible serial printer
± 10% for rates of 0.1 to less than 5 mL/hr
± 5% for rates of 5 to 1000 mL/hr
Pump alarms at approximately 0.5 mL of air
Alarms for any bubble greater than 500 microliters with a tolerance of
200 microliters
Pump alarms at approximately 2 mL of air
Alarms when pump detects 2.0 +1.0/-0.2 mL of air in 6 mL of total
volume delivered
Alarm is not activated
Recommend using air-eliminating filter when Air Sensitivity is set to OFF
Alarms when pump detects distal pressure greater than 7 psi (48 kPa)
± 5 psi (±34 kPa)
Alarms when pump detects distal pressure greater than 12 psi (83 kPa)
± 8 psi (±55 kPa)
Alarms when pump detects distal pressure greater than 26 psi (179 kPa)
±14 psi (±96 kPa)
Alarms when pump detects proximal pressure less than or equal to -4 psi
(-28 kPa)
Abbott GemStar Manual 430-600095-002 (Rev. 8/02)