USER'S GUIDE
4.6.14.4
Display Multiple-Connect Call Signs – The CHCALL Command
CHCALL
displays the call sign of the "connected-to" station after the channel identifier.
CHCALL
is especially useful when operating with multiple connections. Using
similar to using
Set CHCALL ON if you intend to operate multiple connections.
4.6.14.5
Display Doubled Characters – The CHDOUBLE Command
CHDOUBLE
When
acters if are the same as your
CHDOUBLE ON
Set
CHSWITCH
tween
generated by your PK-232.
PK232UG Rev. B 9/86
MRPT
to show digipeat paths when monitoring the channel.
ON
is set
, your monitor displays received characters as doubled char-
CHSWITCH
when operating with multi connections to tell the difference be-
characters received from other stations and
4-38
character.
OPERATING MODES
CHCALL
CHSWITCH
characters
91
is