Table of Contents
Advertisement
USER'S GUIDE
o
The command
The abbreviation
MYC, MYCA, MYCAL
If a command requires parameters, the type of parameter is indicated after the command
name as well as the default value. For example:
n
o
means the command takes a numerical parameter value.
3.3.5
Default Values
Some commands have initial values that your PK-232 assumes as defaults or "used most
often". These defaults are stored in EPROM and loaded into RAM when the system is first
powered up – or when you give the RESET command.
3.3.6
Parameters, Arguments and Values
Some commands need additional information before they can be executed. This type of
command has "parameters" or requires "arguments".
For example, a command such as
o
The value that fill this parameter is either ON or OFF.
When you type
want the PK-232 to use to execute the command
o
Immediate commands such as ID have no parameters. Typing only
PK-232 to execute the command.
Some commands such as CONNECT have optional parameters.
o
If you enter
of the link.
However, if you enter
establish the link to N7ML.
Some commands such as
accepts from 1 to 4 numerical arguments. You can type
Both are legal commands.
Three different types of parameters are used: Boolean, numeric and text or string.
o
Boolean Parameters
Boolean parameters have only two possible values, such as ON and OFF, YES or NO,
or EVERY and AFTER. When a parameter is Boolean, its two possible choices are
shown separated by a vertical bar.
PK232UG Rev. B 9/86
MYCALL
can be entered by simply typing MY.
M
is not enough (and will interpreted as another command), but
MYCALL
or
are acceptable.
FULLDUP
FULLDUP
FULLDUP
ON,
CONNECT
without an argument, the PK-232 displays the current status
CONNECT
N7ML, the PK-232 issues the connect request and tries to
MFILTER
can use several arguments at the same time.
has a Boolean parameter;
is the command, ON is its argument the value you
FULLDUP
.
MFILTER 12
3-5
BASIC OPERATION
MY,
ID
causes the
MFILTER
or
MFILTER 12,
26.
41
Advertisement
Table of Contents
