Table of Contents
Advertisement
USER'S GUIDE
MFROM
uses arguments to determine how your PK-232 monitors the Packet channels and display
information – which stations' packet will be displayed and which stations' packet will be masked or
MFROM
hidden.
is set to
MFROM
Type
to display the ALL/NONE/Yes list/NO list status of station call sign whose packets will
or will not be displayed. You can use the abbreviated command form or mnemonic:
mfrom
cmd:
To stop any packets from being displayed, type
To display packets from one or more specific stations, type
signs. Packets will be displayed only from stations whose call signs are listed after YES.
To hide or mask packets from one or more specific stations, type
call signs. Packets from stations whose call signs are listed after NO will not be displayed.
You can include optional SSIDs specified as "-
or "YES N6IA" any combination N6IA, N6IA-1,...N6IA-15 will be matched and processed. If MFROM
is set to "YE N6IA-1" or "NO N6IA-1", then only N6IA-1 will match and be processed.
MFROM
MTO
When
and
arguments take the following priority:
1. ALL,
Clear MFROM with %,
MHEARD
Mode: Packet
MHEARD
is an immediate command that displays a list of stations heard since the last time
MHEARD
buffer was cleared.
Use a percent sign (%), an ampersand (&), N, NO,
the MHEARD buffer.
The maximum number of heard stations that can be logged is 18. If more stations are heard, ear-
lier entries are discarded.
Stations that are heard directly are marked with a * in the heard log.
Stations that have been repeated by a digipeater are not marked.
If you clear the list of stations heard at the beginning of a session, you can use this command
to keep track of stations that are active during that period.
Logging of stations heard is disabled when
DAYTIME
When
has been used to set the date and time, entries in the heard log are time
stamped. When DAYSTAMP is ON, the date is also shown before the time. Here is an actual sam-
MHEARD
ple of the
function with the clock set:
PK232UG Rev. B 9/86
all
when you start your PK-232 for the first time.
or
MFROM
mf
cmd:
MFROM
contain different types of arguments, to avoid any possible conflict, the
2. NO list,
3. YES list,
&
or
OFF
as arguments.
Mnemonic: MH
all
yes WX1AAA,WX2BBB,WX3CCC,WX4DDD
MFROM
NONE.
MFROM YES
MFROM NO
n
" after the call sign. If MFROM is set to "NO N6IA,"
4. NONE
Immediate Command
NONE
or
OFF
after the command word to clear
PASSALL
is ON.
6-48
COMMAND SUMMARY
followed by a list of call
followed by a list of
150
Advertisement
Table of Contents
